From CAD to welded parts.
Our robotic cell assembles, tacks and welds your small steel parts straight from the 3D model. No programmer, no jig, no waiting for a welder to become available.
.stp / .step files · instant 3D preview · indicative price
Welding is short of hands, not of orders.
Europe is short of around 300,000 qualified welders according to the European Welding Federation, and retirements are widening the gap. In small workshops, most parts are still welded entirely by hand. The result: orders turned down, lead times slipping.
A conventional robot does not solve small batches: every part number needs a program, a jig and manual tacking. On a typical part from our study, the arc accounts for only about 3 minutes out of 21 minutes of work. The rest is preparation.
From 3D file to welded part, with no manual step.
The software does the preparation that ties up a qualified welder today. Changing part number means changing file.
- 01
You send the STEP file.
Our software breaks the assembly down into components.
- 02
It plans the assembly.
Placement order, tack points, weld seams.
- 03
The robots assemble.
One arm picks and positions the laser-cut parts, the other tacks then welds.
- 04
You receive the parts.
Inspected, ready to paint or install.
One full cycle, played before it is welded.
Before each batch, the cycle is played in simulation: the cobot places the parts, the robot tacks them, then welds every seam. Conflicts show up on screen, not in the workshop.
Two ways to work with us.
Steel brackets, frames, chassis and machine bases.
From 1 to a few hundred units. Indicative price online from your STEP file.
Get an estimateRent a cell that welds your files with no programming.
Then buy it if it suits you: the rent you have paid is deducted.
See the cellWhat we make
All applicationsBrackets and consoles
Reference partMounting lugs, consoles, brackets: the project's reference part, 6 components.
Frames and chassis
SeriesLight frames for machines, conveyors and equipment, repeatable in series.
Machine bases
Sub-assemblyWelded sub-assemblies for machine builders.
Metal fit-out parts
FurnitureTable legs, shelf brackets, steel fit-out elements.
Built by workshop people.
The project is led by a mechatronics engineer: industrial robotics and CE marking, patents on products launched at scale, and hundreds of welded parts designed and then followed through the workshop.
An expert welder supports the development of the welding procedures. Our first pilot customers, the number of parts produced and EN ISO 3834 certification will be shown here once they exist, not before.
Our story and the teamWhere we are
- Planning softwareFrom STEP to welding paths, validated in simulation
- Robotic cellIn design. Meanwhile, your parts are produced with a partner workshop
- Pilot workshops and customersWe are looking for real parts to produce
- Production and rentalGradual opening, limited places
Frequently asked questions
What parts can you weld?
What about stainless steel or aluminium?
Is the online price firm?
Where do you produce?
A STEP file is all it takes to get started.
Upload your assembly: instant 3D preview, indicative price, then a firm price once a technician has checked the file.